Plc-xf41 owners manual

Air blown from exhaust vent is hot. Confirm AC plug type with chart below and proper AC power cord must be used. Page 9: Lens Installation 2. For installation, refer to installation manual supplied to a Projector. When moving or setting up a projector, be sure to replace a Lens Cover to protect a surface. And be careful not to hold or subject a lens to strong forces. It may damage lens, cabinet, or mechanical parts.

Projection angle can be adjusted to 5. Page 12 Refer to P14, Refer to P Occasionally, micro processor may malfunction and need to be reset. Maximum operating range for Remote Control Unit is about Wait at least 5 minutes before turning on projector again.

Volume dialog box appears on screen for a few seconds. When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting.

Some computers need setting manually. Note : Projector may display one of following messages. Page Pc Adjustment Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. If this happens, projector cannot reproduce a proper image and image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.

Page 31 Display area Selects area displayed with this projector. Jump to Highlights Calculate Throw Distance. Product Downloads Product Sheet. User Manual. This manual is available in the following languages: English.

Is your question not listed? Before operating this projector, read this manual thoroughly and operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other. The Lamp Management Function automatically changes the combinations of lighting lamps by detecting which lamps are still working.

You can set the lamp mode to use either four lamps or two lamps. Using 2 lamps will prolong the life of the projector lamps. A second dialog screen appears.